PE Substrates

Request a sample

Chimie Tech offers a wide range of substrates specially designed or treated for Printed electronics - from PET, ITO, TPU, Kapton to silicon films - to meet different operating temperatures range and cost constraints.

Have a question? Get in touch

Thermally Stable Paper for printing and curing

Name	Type	Thickness (µm)	Sintering T°C	Benefits	PDF
PowerCoat® XD	Coated Paper	80/125/200	180°C	High roll-to-roll strength required in flexo, gravure, offset and screen printing techniques Superb sintering capabilities in air, photonic and RF thermal processes Superior thermal stability in colour and dimension (180°C during 5 min)
PowerCoat® HD	Coated Paper	95- 230	200°C	High definition pattering Superior thermal stability in colour and dimension (200°C)

Intexar™-Liveo™ Film

Type	Product Code	Features	PDF
Substrate	Intexar™ TE11-C	High recovery TPU based film with adhesive
Hot meltdhesive	Intexar™ TE21-C	High recovery adhesive – 120°C melting Temperature
Adhesive SSA	Liveo™ MG7-xxxx	Soft Skin Adhesive for gentle patch wear on human body
Silicon elasto	Liveo™ C6/Q7	Four housing, insulating, cover ans based film
Adhesive PSA	Liveo™ MG-2xxx	Pressure Sensitive silicone adhesive for medical device

Pressure Sensitive Adhesive (PSA)

Type	Product Code	Features	PDF
Adhesive	PSA S200/ -400	Transfer tape pressure sensitive acrylic adhesive (50 to100µm) backed with release liner.
Adhesive	PSA F25/ -50/ -100	Medium performance acrylic adhesive from 25 to 100µm

Kapton PI Based Film

Type	Product Code	Features	PDF
Substrate	HN X00/ HPP	Kapton film from 25 to 125µm
Substrate	RS200	Carbon coated Kapton for heater application
Coverlay	FR/ LF/ HT	Kapton film with adhesive
CCL	FR/ LF/ HT/ AC/ AP	Copper Cladded Kapton

PET/PC/ITO Coated Film

Type	Product Code	Features	PDF
Substrate	DuPont ST-504	Crystal clear, Heat stabilized PET. Pretreated on one side for improved adhesion
Substrate	DuPont ST-506	Clear, Heat stabilized PET. Pretreated on both sides
Substrate	Alltech ITO X00	ITO coated PET from 100 to 300 Ohm/sq
Substrate	Makrolon DE1-4	Polycarbonate 1 side glossy, 1 side matt for printing

Release Film

Type	Product Code	Features	PDF	PDF
Release Film	Pacothane HT/ Pacolon	Release film with operating temperature of 204°C